8 permits · verified 2026-09-04
What permits do you need to open a contractor or trade in Greensboro?
In short
A contractor or trade in Greensboro, NC has 1 permit that applies to every business of this type, plus 7 more that depend on your premises, signage or how you are set up. North Carolina Department of the Secretary of State, Business Registration Division charges $125 one-time filing for the articles of organization (llc). 3 of the 8 are charged as a range or formula rather than a flat fee. Verified 2026-09-04 against the issuing agencies’ published fee schedules.
Permits particular to a contractor or trade in Greensboro
| Permit | Issuing agency | Fee | Renews | Last checked |
|---|---|---|---|---|
| Contractor Licensing — North Carolina State Boards (Greensboro)only if it applies to you | City of Greensboro Engineering and Inspections, Development Services | No fee | not applicable | 2026-09-04 |
| General Contractor Licenseonly if it applies to you | North Carolina Licensing Board for General Contractors | $75–$125 application — $75 limited, $100 intermediate, $125 unlimited | annual — expires 1 January and becomes invalid sixty days later | 2026-09-03 |
Fees shown as a range or formula are set that way by the issuing agency — we do not average them into a single number.
Local permits that apply to every type of business in Greensboro
| Permit | Issuing agency | Fee | Renews | Last checked |
|---|---|---|---|---|
| Commercial Building Permitonly if it applies to you | City of Greensboro Engineering and Inspections, Development Services | Varies — formula on the Greensboro page | one-time, per project | 2026-09-04 |
Fees shown as a range or formula are set that way by the issuing agency — we do not average them into a single number.
NC registrations that apply to every type of business
| Permit | Issuing agency | Fee | Renews | Last checked |
|---|---|---|---|---|
| Certificate of Registration (sales and use tax) | North Carolina Department of Revenue | No fee | no renewal — but see the dormancy rule | 2026-09-03 |
| Articles of Organization (LLC)only if it applies to you | North Carolina Department of the Secretary of State, Business Registration Division | $125 one-time filing | no expiry, but an annual report is due every 15 April | 2026-09-03 |
| Annual Reportonly if it applies to you | North Carolina Department of the Secretary of State, Business Registration Division | Varies — formula on the NC page | annual — 15 April for an LLC | 2026-09-03 |
| Articles of Incorporationonly if it applies to you | North Carolina Department of the Secretary of State, Business Registration Division | $125 one-time filing | no expiry, but an annual report is due each year | 2026-09-03 |
| General Business License — North Carolina Secretary of State Positiononly if it applies to you | North Carolina Department of the Secretary of State, Business Registration Division | No fee | not applicable | 2026-09-03 |
Fees shown as a range or formula are set that way by the issuing agency — we do not average them into a single number.
How much does it actually cost to permit a contractor or trade in Greensboro?
There is no single figure, and any site quoting one is rounding away the part that matters. Of the 8 records listed for a contractor or trade in Greensboro, NC, 1 apply to every business of this type and 7 are conditional. Adding every fee on the page together would overstate what most operators pay, because it would include permits they never need.
3 of the 8 are charged as a range or a formula set by the issuing agency, and 3 have no fee published at all. The ones particular to this business that vary:
General Contractor License: $75–$125 application — $75 limited, $100 intermediate, $125 unlimited
The other 2 variable fees belong to permits that apply to every type of business here; their formulas are set out on the Greensboro permits page and the NC state page.
Which offices issue these permits in Greensboro?
Permits for a contractor or trade in Greensboro, NC come from 4 separate offices: City of Greensboro Engineering and Inspections, Development Services, North Carolina Department of Revenue, North Carolina Department of the Secretary of State, Business Registration Division, North Carolina Licensing Board for General Contractors. No single office issues them all, which is why an opening means filing in several places rather than one.
- City of Greensboro Engineering and Inspections, Development ServicesIssues 2 permits on this page: Commercial Building Permit, Contractor Licensing — North Carolina State Boards (Greensboro)300 West Washington Street, Greensboro, NC 27401 · 336-373-2155www.greensboro-nc.gov/departments/engineering-inspections
- North Carolina Department of RevenueIssues 1 permit on this page: Certificate of Registration (sales and use tax)PO Box 25000, Raleigh, NC 27640-0640 · (877) 252-3052www.ncdor.gov/taxes-forms/sales-and-use-tax/sales-and-use-tax-registration
- North Carolina Department of the Secretary of State, Business Registration DivisionIssues 4 permits on this page: Articles of Organization (LLC), Annual Report, Articles of Incorporation, General Business License — North Carolina Secretary of State Position2 South Salisbury Street, Raleigh, NC 27601-2903 · (919) 814-5400www.sosnc.gov/divisions/business_registration
- North Carolina Licensing Board for General ContractorsIssues 1 permit on this page: General Contractor License5400 Creedmoor Road, Raleigh, NC 27612 · (919) 571-4183www.nclbgc.org
What does a contractor or trade need in Greensboro that other businesses do not?
2 of the 2 permits particular to a contractor or trade here apply to no other business type we cover in Greensboro: Contractor Licensing — North Carolina State Boards (Greensboro) and General Contractor License.
Contractor Licensing — North Carolina State Boards (Greensboro)
The City of Greensboro's Engineering & Inspections page 'Contractor Licensing Verification Websites' points to five North Carolina state boards for contractor credentials — the NC Licensing Board for General Contractors, the State Board of Examiners of Electrical Contractors, the State Board of Examiners of Plumbing, Heating & Fire Sprinkler Contractors, the NC Board of Architecture and the NC Board of Examiners for Engineers & Surveyors. That page lists no city contractor license or registration, so no city fee is shown; the license and its fee come from the relevant state board.
General Contractor License
North Carolina does license general contractors, and the threshold is the number to know: the license is required where the cost of the undertaking is $40,000 or more, so smaller jobs need none. Three tiers cap the single project you may take — $750,000 limited, $1,500,000 intermediate, unlimited above — and each carries a financial test that dwarfs the application fee: working capital of $17,000, $75,000 or $150,000, or a surety bond of $175,000, $500,000 or $1,000,000 instead. Renewal also needs proof of continued financial responsibility and eight hours of continuing education a year, two of them a mandatory board course. Late renewal costs $10 for every month or part after 1 January. Lose your qualifying individual and you have ninety days to replace them, during which you may not bid or take new work; let the license stay invalid four years and it is archived, the number never reissued, and you start again with a new application and a new exam.
The other 1 local permit in the tables apply to every type of business in Greensboro, NC; what each one involves is set out on the Greensboro permits page. The 5 state-level registrations apply to every type of business across NC and are covered on the NC state page.
How does a contractor or trade compare with other businesses in Greensboro?
The closest match is a auto repair shop, which shares 0 of these permits. A contractor or trade also needs Contractor Licensing — North Carolina State Boards (Greensboro) and General Contractor License. A auto repair shop needs Safety Inspection Station License and Automotive Repair Shop Licensing — North Carolina Position, which a contractor or trade does not.
| Business | Its own permits | Shared with a contractor or trade | Only a contractor or trade needs | Only it needs |
|---|---|---|---|---|
| Auto repair shops | 2 | 0 | 2 | 2 |
| Childcare centres | 1 | 0 | 2 | 1 |
| Coffee shops | 5 | 0 | 2 | 5 |
| Fitness studios | 0 | 0 | 2 | 0 |
| Restaurants | 5 | 0 | 2 | 5 |
| Retail stores | 1 | 0 | 2 | 1 |
| Salons and barbers | 2 | 0 | 2 | 2 |
| Veterinary clinics | 1 | 0 | 2 | 1 |
Sources
Every figure for the permits explained on this page was read from one of these government pages on the date shown. Sources for the permits that apply to every type of business are listed on the Greensboro permits page and the NC state page. Confirmed by Editorial Team.
- City of Greensboro — confirming contractors are licensed only by North Carolina state boards, not the cityCity of Greensboro · primary source · retrieved 2026-09-04
- North Carolina Licensing Board for General Contractors — 2026 laws and regulations, reproducing G.S. chapter 87 article 1 and 21 NCAC 12North Carolina Licensing Board for General Contractors · primary source · retrieved 2026-09-03
- North Carolina Licensing Board for General Contractors — classifications and limitationsNorth Carolina Licensing Board for General Contractors · primary source · retrieved 2026-09-03
Related
Commercial Compliance Hub publishes information, not legal advice. Requirements change — confirm anything you rely on with the issuing agency before you file.