Commercial Compliance Hub
Check requirements

12 permits · verified 2026-10-02

What permits do you need to open a contractor or trade in Gwinnett County?

In short

A contractor or trade in Gwinnett County, GA has 4 permits that apply to every business of this type, plus 8 more that depend on your premises, signage or how you are set up. Gwinnett County Fire Marshal's Office charges $100 per Fire Certificate of Occupancy for a tenant building, per the Dept. of Planning & Development's Fee Schedule, Fire section for the gwinnett county fire certificate of occupancy (countywide). 3 of the 12 are charged as a range or formula rather than a flat fee. Verified 2026-10-02 against the issuing agencies’ published fee schedules.

Permits particular to a contractor or trade in Gwinnett County

Permits required, with issuing agency, fee, renewal term and the date each record was last verified against its source
Electrical Contractor Licenseonly if it applies to youGeorgia State Construction Industry Licensing Board$110 application, by examinationbiennial — expires 30 June of even-numbered years2026-09-03
Roofing, Painting, Flooring and Landscaping — Georgia Traditional Specialty Contractorsonly if it applies to youGeorgia State Licensing Board for Residential and Commercial General ContractorsNo feenot applicable2026-09-03
Residential or General Contractor Licenseonly if it applies to youGeorgia State Licensing Board for Residential and Commercial General Contractors$210 application — $200 plus a $10 processing fee; $100 to renewbiennial — expires 30 June of even-numbered years2026-09-03

Fees shown as a range or formula are set that way by the issuing agency — we do not average them into a single number.

Local permits that apply to every type of business in Gwinnett County

Permits required, with issuing agency, fee, renewal term and the date each record was last verified against its source
Business/Occupation Tax CertificateGwinnett County Licensing & Revenue Office, Dept. of Planning & DevelopmentVaries — formula on the Gwinnett County pageAnnual; renewal due February 15. A $25.00 late fee applies after the deadline, with an additional 10% penalty after March 31 plus 1.5% monthly interest.2026-10-02
Gwinnett County Fire Certificate of Occupancy (Countywide)Gwinnett County Fire Marshal's Office$100 per Fire Certificate of Occupancy for a tenant building, per the Dept. of Planning & Development's Fee Schedule, Fire sectionPer occupancy, required before a commercial business opens or changes tenancy.2026-10-02
Rezoning / Special Use Permit / Zoning Varianceonly if it applies to youGwinnett County Dept. of Planning & Development, Building & Development DivisionsVaries — formula on the Gwinnett County pagePer application.2026-10-02
Certificate of Occupancy / Tenant Name Change PermitGwinnett County Dept. of Planning & Development, Building & Development DivisionsVaries — formula on the Gwinnett County pagePer occupancy; a Tenant Name Change Permit is required in place of a new Certificate of Occupancy when there is no construction.2026-10-02

Fees shown as a range or formula are set that way by the issuing agency — we do not average them into a single number.

GA registrations that apply to every type of business

Permits required, with issuing agency, fee, renewal term and the date each record was last verified against its source
Sales and Use Tax Certificate of RegistrationGeorgia Department of Revenue, Taxpayer Services DivisionNo feeno renewal — valid until cancelled, suspended or revoked2026-09-03
General Business License — Georgia state position (local occupation tax certificate)only if it applies to youGeorgia Secretary of State, Corporations DivisionNo feeset by the issuing city or county, usually annual2026-09-03
Articles of Incorporationonly if it applies to youGeorgia Secretary of State, Corporations Division$110 one-time — $100 filing fee plus a $10 service chargeno expiry, but an annual registration is due each year2026-09-03
Articles of Organization (LLC)only if it applies to youGeorgia Secretary of State, Corporations Division$110 one-time — $100 filing fee plus a $10 service chargeno expiry, but an annual registration is due each year2026-09-03
Annual Registrationonly if it applies to youGeorgia Secretary of State, Corporations Division$60 a year — $50 plus a $10 service charge; $40 for a nonprofitannual — filed between 1 January and 1 April2026-09-03

Fees shown as a range or formula are set that way by the issuing agency — we do not average them into a single number.

How much does it actually cost to permit a contractor or trade in Gwinnett County?

There is no single figure, and any site quoting one is rounding away the part that matters. Of the 12 records listed for a contractor or trade in Gwinnett County, GA, 4 apply to every business of this type and 8 are conditional. Adding every fee on the page together would overstate what most operators pay, because it would include permits they never need.

Of the 4 that always apply, 1 carry a flat fee, coming to $100.00. That is a floor, not a total. 3 of the 12 are charged as a range or a formula set by the issuing agency, and 3 have no fee published at all.

The other 3 variable fees belong to permits that apply to every type of business here; their formulas are set out on the Gwinnett County permits page and the GA state page.

Which offices issue these permits in Gwinnett County?

Permits for a contractor or trade in Gwinnett County, GA come from 7 separate offices: Gwinnett County Licensing & Revenue Office, Dept. of Planning & Development, Gwinnett County Fire Marshal's Office, Gwinnett County Dept. of Planning & Development, Building & Development Divisions, Georgia Department of Revenue, Taxpayer Services Division, Georgia State Construction Industry Licensing Board, Georgia State Licensing Board for Residential and Commercial General Contractors, Georgia Secretary of State, Corporations Division. No single office issues them all, which is why an opening means filing in several places rather than one.

What does a contractor or trade need in Gwinnett County that other businesses do not?

3 of the 3 permits particular to a contractor or trade here apply to no other business type we cover in Gwinnett County: Electrical Contractor License, Roofing, Painting, Flooring and Landscaping — Georgia Traditional Specialty Contractors and Residential or General Contractor License.

Electrical Contractor License

Two classes at the same price: Class I is restricted to single-phase installations not exceeding two hundred amperes at the service, and Class II is unrestricted. Reinstating a license lapsed under three years costs $310. No renewal amount is recorded because none is published — the board's own rule says renewal fees will be set by the board rather than fixed in the code, and the schedule the board links to returns an empty page to every client. The fee schedule PDFs still sitting on the Secretary of State's server are demonstrably superseded: they say $30 to apply where this guide says $110. Continuing education is four hours a year, half of it in code courses for electricians.

Roofing, Painting, Flooring and Landscaping — Georgia Traditional Specialty Contractors

There is no state license fee for these trades: the licensing board's Traditional Specialty Contractors policy statement, issued under O.C.G.A. § 43-41-17, publishes flat roofing, sheet metal roofing, painting and special coatings, wood flooring, carpet and tile, landscape and irrigation, drywall, masonry, siding, insulation, gutters, windows and concrete are all published as traditional specialty contractors who need no residential or general contractor license. The state trade-licensing chapter names exactly five licensed trades — electrical, plumbing, conditioned air, low voltage and utility — and nothing else. Two caveats: work of this kind can still fall under the general contractor license at higher project values, and cities and counties routinely register these trades locally.

Residential or General Contractor License

Georgia does license general contractors, and one fee covers all four classes — the price does not vary by tier, only the qualifications do. Residential Basic covers detached houses and townhouses up to three storeys on a $25,000 net worth and $300,000 of liability cover; Residential Light Commercial adds multifamily and light commercial under four storeys on $500,000 of cover; General Contractor is unlimited on a $150,000 net worth; and a Limited Tier caps any single contract at a million dollars on the smaller net worth. The threshold that matters is in the definition rather than the licensing section: work only counts as residential contracting where its value exceeds $2,500, so smaller jobs are outside the regime entirely. Owner-builders may build for their own occupancy once every twenty-four months without a license.

The other 4 local permits in the tables apply to every type of business in Gwinnett County, GA; what each one involves is set out on the Gwinnett County permits page. The 5 state-level registrations apply to every type of business across GA and are covered on the GA state page.

How does a contractor or trade compare with other businesses in Gwinnett County?

The closest match is a auto repair shop, which shares 0 of these permits. A contractor or trade also needs Electrical Contractor License, Roofing, Painting, Flooring and Landscaping — Georgia Traditional Specialty Contractors and Residential or General Contractor License. A auto repair shop needs Building Permit and Automotive Repair Shop License — Georgia state position, which a contractor or trade does not.

Permits particular to each business type in Gwinnett County, GA, compared with a contractor or trade
BusinessIts own permitsShared with a contractor or tradeOnly a contractor or trade needsOnly it needs
Auto repair shops2032
Childcare centres3033
Coffee shops7037
Fitness studios3033
Food trucks4034
Restaurants7037
Retail stores2032
Salons and barbers3033
Veterinary clinics1031

Sources

Every figure for the permits explained on this page was read from one of these government pages on the date shown. Sources for the permits that apply to every type of business are listed on the Gwinnett County permits page and the GA state page. Confirmed by Editorial Team.

  1. Georgia Secretary of State — how-to guide for electrical contractorsGeorgia Secretary of State · primary source · retrieved 2026-09-03
  2. Georgia Comp. R. & Regs. chapter 295-2 — expiration and renewal dates for every license administered by the Professional Licensing Boards DivisionGeorgia Secretary of State · primary source · retrieved 2026-09-03
  3. Georgia State Licensing Board — traditional specialty contractors policy statement, listing the trades that need no state licenseGeorgia Secretary of State · primary source · retrieved 2026-09-03
  4. Georgia Secretary of State — Professional Licensing Boards Division, the complete list of licensing boardsGeorgia Secretary of State · primary source · retrieved 2026-09-03
  5. Georgia State Licensing Board for Residential and Commercial General Contractors — fee scheduleGeorgia Secretary of State · primary source · retrieved 2026-09-03

Related

Commercial Compliance Hub publishes information, not legal advice. Requirements change — confirm anything you rely on with the issuing agency before you file.